[alfa] Head gasket warning

[Tom Sahines <tsahines@xxxxxxxxxxxxxx>]

The OEM head gaskets provided do not have the adhesive applied correctly. 
You must add a gasket sealer at the rear of the gasket to allow for the 
rear oil galleys to be sealed properly. I use Permatex Ultra grey (light 
thin coating) on both sides of the gasket around the two oval shaped holes 
at the rear of the head gasket.

I have had quite a few calls telling me of water in the oil because the oil 
galleys did not seal correctly.


Tom Sahines ARA Tech Hot Line San Jose California.
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided