Re: [alfa] Re: alfa-digest V10 #43

["Dean" <tessiedog@xxxxxxxxxxxxx>]

Brian some people just dont listen...lol
Dean
-----Original Message-----
From: Brian Shorey <bshorey@domain.elided>
To: 'th3' <th3@domain.elided>; alfa@domain.elided <alfa@domain.elided>
Date: Sunday, 18 April 2004 2:37
Subject: RE: [alfa] Re: alfa-digest V10 #43


>> >Zamani give me the solution.  There is something called bolt out for
>> >rounded bolts at Sears.  It did the trick.  If you do have
>> to grind a bolt head off, I would still like to know what you
>> would use, especially in a tight area like the rear rotor bolts.
>
>It's easy to grind them out, IIRC you can get at the bottom ones, then just
>rotate things so the others get down to where you can get at them.
>
>In my experience, once you've relieved the stress by gringind the heads
off,
>and removed the rotors, the threaded part of the bolt usually comes out
>pretty easily.
>
>bs
>--
>to be removed from alfa, see /bin/digest-subs.cgi
>or email "unsubscribe alfa" to majordomo@domain.elided
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided