[alfa] Re: Fuel Injection Host Clamp - Loctite

[Mcmahonmik@xxxxxxx]

A valid point for the Hose Clamps.
But, heat does kill Loctite, so you should be able to heat up the Leatherman 
pivot and whack it a good one to try and loosen things up.  

-mike mcmahon
94 164LS
86 spider

In a message dated 5/10/2004 1:34:43 PM Central Standard Time, 
owner-alfa-digest@domain.elided writes:
I would definitely tell you to stay away from using the green loctite 
(wicking grade) for this application. ...  You'll have a 
very difficult time ever removing the clamps again if you use it. I 
accidentally got some on my leatherman (it ran into the pivot on one side), 
and I haven't 
been able to get anything from that side out for over a year now.
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided