[alfa] Re: Fuel Injection Hose Clamp Problem

[John.Wiltshire@xxxxxxxxxxxxxxxxxxxxx]

Rex,

Are you sure that the clamps are proper EFI grade clamps?  EFI clamps are
different to general hose clamps.  EFI clamps will remain tight.  Ordinary
ones won't.

Read my story of fixing leaky fuel hoses on my 164 at
http://www.alfapro.com/html/fuel_hoses.html   Since I did this job four
years ago, I haven't had a single problem.

Hope this helps!

Cheers,
John Wiltshire




**********************************************************************
Notice from Goodman Fielder Pty Ltd and its subsidiaries.

This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom
they are addressed. 

If you have received this email in error, you are prohibited from
reading, copying, distributing and using the information. Please
contact the sender immediately by return email and destroy 
the original message.

You should scan this message and any attachments for viruses.
Under no circumstances do we accept liability for any loss or
damage which may result from your receipt of this message or
any attachments.
**********************************************************************
This message was processed - Tue, 11 May 2004 16:51:47 +1000
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided