[alfa] Compresion Ratio modification

["Gwynne W. Spencer" <gwynnes1@xxxxxxxxxxx>]

If one has a 2000 GTV engine with 10.4:1 pistons, SPICA injection and has 
problems with knock / detonation - is there a reasonable way to lower the 
CR with some form of special head gasket - I calculate that I would need to 
add about 0.8 mm or 0.032" in space between the head and the block to get 
it down to 9.5.

Any experience with this kind of problem out there?

In an old fashioned solid block engine, one might just add an extra head 
gasket, but with the Alfa wet sleeve setup, do not know if this is a 
feasible solution - would guess NO.

Gwynne Spencer
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided