[alfa] RE: 164 oil pan

[Richard Bies <bies@xxxxxxxxxxxxxxxx>]

Yes, it's a job.

You have to get the car up in the air, then raise the engine a couple
further inches.  Major problems are access to <all> the fasteners, the oil
pump and jockeying the pan to clear.

I'd suggest two things before you even start:  a new pan gasket (which
allows you to count holes) and a 1/4" ratchet set with 5mm and 7mm allen
bits (don't remember which you need, but the other will find use).

rmb
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided