RE: [alfa] FW: Oil Temp Sensor

To: "'Dean Frye'" <dean@xxxxxxxxx>, <alfa-digest@xxxxxxxxxx>
Subject: RE: [alfa] FW: Oil Temp Sensor
From: "Brian Shorey" <bshorey@xxxxxxxxx>
Date: Sat, 19 Jun 2004 15:13:01 -0400
Content-transfer-encoding: 7bit
Content-type: text/plain; charset="us-ascii"
In-reply-to: <000001c455d8$5739f710$320110ac@deanthinkpad>
Reply-to: "Brian Shorey" <bshorey@xxxxxxxxx>
Sender: owner-alfa@xxxxxxxxxx

> I have a 68 Sprint GTV which has had a 2L conversion. The 
> 1600 block seems to have an oil temperature sender. Is it 
> possible to fit a sender to a 2L motor without serious modification?

I put an oil temp sender in my 2L Spider by drilling a hole in the rear top
edge of the sump on the drivers side, then finding a sender that was long
enough to reach almost to the bottom of the sump.

Obviously, you don't want to do this with the sump in the car..

bs
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]

References:
- [alfa] FW: Oil Temp Sensor
  - From: Dean Frye

Prev by Date: [alfa] dragging clutch, GTV-6
Next by Date: [alfa] Paint
Previous by thread: [alfa] FW: Oil Temp Sensor
Next by thread: [alfa] 82 GTV6 for sale in NJ
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index