RE: [alfa] V6 3.0 Engine Rebuild

[MGULIANO@xxxxxxxx]

Lalo,
You are correct on your thinking that the piston weights are with in
tolerance. But think of it this way...... Where am I going to put the
RPM for this motor. If you want to increase the RPM from stock. Balance
it!!!! Get the person to make all the pistons and rods weigh the same
+/- 0. Some call it race balance. And then balance the rotating mass at
50%.

I take mine up to 7500 all the time........ So far so good

Mike Guliano
Phoenix

"MMS <apsc.com>" made the following annotations.
-----------------------------------------------------------------------------
-
--- NOTICE ---
This message is for the designated recipient only and may contain
confidential, privileged or proprietary information.  If you have received it
in error, please notify the sender immediately and delete the original and any
copy or printout.  Unintended recipients are prohibited from making any other
use of this e-mail.  Although we have taken reasonable precautions to ensure
no viruses are present in this e-mail, we accept no liability for any loss or
damage arising from the use of this e-mail or attachments, or for any delay or
errors or omissions in the contents which result from e-mail transmission.

=============================================================================
=
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided