[alfa] Help need a quick answer, milano stub axles

[Carson or Wendy <dammwood@xxxxxxx>]

Are the two output stub axles from milano transaxles the same for 2.5 
and 3L versions?
I took the LSD out of the 3L and swapped it into the plat's transaxle 
(which had an open diff installed...) and everything went well and the 
car is driving well.
I went to clean up the garage today and was trying to put the leftover 
bits back into the 3L transaxle and the internal splines on the open 
diff don't seen to engage the splines on the stub axles...
I've got an autocross on sunday and I still have to install headers that 
I should have in my hands tomorrow so if I have to pull my diff apart 
again and put the open back in I have to get a different car ready.

I always thought that these were all the same except the final drive 
ratio's. Are there two different output shaft bearing PN's for 2.5 and 
3l TA's?
--
Carson Damm
Ft. McMurray, AB
Canada

04 Volvo V70R
88 Alfa Milano Verde
87 Alfa Milano Platinum
81 Fiat X1/9
77 Alfa Spider
61 Alfa Giulietta spider
http://members.shaw.ca/wbscc/index.html
http://groups.yahoo.com/group/jetranger/
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided