[alfa] re: torsion bar blues, help please? (long)

[Joe Elliott <jee@xxxxxxxxxxxxxx>]

The key to front ride height adjustment on these cars is to rotate 
both ends of the bar by the SAME NUMBER of splines.  IIRC, moving one 
spline on each end will raise or lower the car by 1.4mm.  For 
example, to raise the driver's side by half an inch, you would rotate 
both ends of the driver's side bar counterclockwise (from the 
driver's reference frame) by nine splines.

Hope that helps,
Joe Elliott
'82 GTV-6 (stock springs, lowered 21mm in front--that's 15 increments)
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided