RE: [alfa] Cylinder head compatibility

To: "'James Butler'" <jbutler@xxxxxxxxxxxx>, <alfa-digest@xxxxxxxxxx>
Subject: RE: [alfa] Cylinder head compatibility
From: "Jeff Greenfield" <alfaguy@xxxxxxxxxxxx>
Date: Sun, 1 Aug 2004 20:54:25 -0400
Content-transfer-encoding: 7bit
Content-type: text/plain; charset="US-ASCII"
In-reply-to: <BD328153.15C0%[email protected]>
Reply-to: "Jeff Greenfield" <alfaguy@xxxxxxxxxxxx>
Sender: owner-alfa@xxxxxxxxxx

'72 through '81 should work fine. You may want to set the cam timing to 102
degrees on both cams as this is generally considered the best all around
setting for all years.

The marks on the cam caps are the only things that will be different. If you
get a used head, make sure it comes with all six bearing caps as they are
matched to the head.

HTH,

Jeff

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of
James Butler
Sent: Sunday, August 01, 2004 2:16 PM
To: [email protected]
Subject: [alfa] Cylinder head compatibility

I am in need of a head for my 78 Spider and would like to know what years
are compatible.
Thanks,
Jim
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]

References:
- [alfa] Cylinder head compatibility
  - From: James Butler

Prev by Date: RE: [alfa] Re:tranny & diff lubricants
Next by Date: [alfa] rotisserie
Previous by thread: [alfa] Cylinder head compatibility
Next by thread: [alfa] 146 ti 2.0 replace fuel uptake unit at 80,000 miles?
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index