[alfa] RE: hardtop bits needed

[JMDUNCAN01@xxxxxxx]

Hey Dean:
 
I will be surprised if you turn up a good set of those j hook panels that  
are in useable shape.  Most of them break the little plastic fingers off  and 
ultimately hit the trash bin.  I had success ordering them from Spruell  for 
around $45 each.
 
Vickauto has ...or did at one time... the defrost/hazard switch bank for  
around $20-30.  They also have new PW switches priced in the same range if  your 
old ones are missing the silk screening.
 
Finally, make sure your new hardtop has the correct hooks that go on top of  
the hardtop plates.  These hooks replace the chrome ball  hooks whenever the 
hardtop is mounted.
 
Best Regards,
John M
------------------------------

Date: Thu, 12 Aug 2004 00:29:28  -0400
From: "Dean W. Cains" <dwc@domain.elided>
Subject: [alfa] hardtop  bits needed

Hi Group:

I've just found an S3/S4 hardtop for my '87  Spider. and there are a few 
bits missing that I'd like to have.  It  looks like there may be a (black) 
plastic snap-in panel to cover each of the  interior side hooks that hold 
the hardtop to the convertible top  frame.  Anyone have an extra set?

Also, how about that console  switch that has hazard light controls on the 
left side, and rear window  defroster controls on the right?  If you don't 
have a hardtop any  longer, and don't want to leave that switch hole open, 
I'd be happy to send  my hazard-only switch in exchange for the combo switch.

Finally, I've got  a pair of those little chrome button-type hooks that fit 
on the rear deck  and are used for the hard-style top boot.  I'd be happy to 
send them to  anyone that needs a set, for just the cost of  postage.

Regards,

Dean
'74 & '87 Spider  Veloce's
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided