[alfa] GTV6 clutch slave cylinder

[Nash Bap <nashbap@xxxxxxxxx>]

Hans:
 
Thanks very much for the clarification.Now I understand.
 
However, does the seal kit for a 4 fit the 6 since they are dimensionally identical?
 
Thanks also to Gwynne Spencer, Mark Manley, Andy Kress and Gary Krumian.
 
Nash Bapasola

 

Date: Fri, 13 Aug 2004 12:50:26 -0400
From: "Hans@ ItalianMotorWorks" 
Subject: [alfa] clutch slave cyl

The V6 and 4 cyl clutch slave cylinders are dimensionally identical, the
pushrods are not.
I always use the V6 csc because it's aluminum; the 4 cyl is cast iron and will
rust in place rather tightly in time. Either way, coat it with some white
lithium grease before installing.
The old pushrod can be reused indefinitely.
Yahoo! Mail - Helps protect you from nasty viruses.
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided