[alfa] GTV brake rotor removal

[Spiros Angelopoulos <alfista164@xxxxxxxxx>]

Once again, I am hoping some you kind people will help...

I fought all afternoon with my GTV trying to remove the front rotor/hub 
assembly with the goal of replacing the rotor, inner/outer bearings, 
caliper and pads.  No problem with the first steps: removed the 
caliper, wheel cap, pin, nut, and outer bearing.  Then, I tried to 
remove the rotor.  What a pain that was!!!  I had to use a pry bar to 
do it!  I was under the impression that the inner bearing would also 
come out with the rotor, and then I would have to remove it (the 
bearing) on the bench.  No such luck.  The only was I managed to remove 
the inner bearing was to cut it with my Dremel from the spindle!  In 
the process, I also ruined the seal, but at least that is a cheap part 
to replace.

My question is, what is the proper/possible way of replacing the rotor 
and bearing?  I still have the other side to work on, so I want to do 
that one right...

As always, thanks in advance

- Spiros
'73 GTV
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided