Re: More about [alfa] GTV6 fuel pump/filter orientation?

[Gilbert Gagne <gil5941@xxxxxxxxxxxxx>]

John wrote" On the GTV6 the only "gasket" involved is a copper washer on 
the banjo fitting and that can be annealed and re-used.  (I can never 
remember the annealing process - heat it to a dull cherry red and then 
quench it in water - or don't quench it - somebody help here.)"

I've always re-used these copper washers used on banjo fittings but only 
after erasing the imprint of the fittings by rubbing on 100 grit 
sandpaper. They are quite soft and quickly clean up when pressed with 
your thumb on sandpaper in a figure eight pattern.

Gil Gagne
Port Orange, FL
1985 Spider
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided