Re: [alfa] GTV rear seat belts

[Richard Welty <rwelty@xxxxxxxxxxxxxxx>]

On Mon, 15 Nov 2004 10:17:40 -0500 "Watry, Andrew (LNG-SFR)" <Andrew.Watry@domain.elided> wrote:

> On my 74 GTV, I used Milano center rear seat belts in the back.  They're
> manually adjustable, rather than retractable.  On my car, the center nuts
> plates were already there, but the outer ones were not, so I drilled holes
> through the body into the wheelwells and used suitable hardware with large
> area washers.

interesting. my 74 gtv had both sets of hard points, but the outer ones were
much further up on the fender well than i expected; it took me a while to find
them.
  
> Some GTVs may have both sets of nut plates, and may also have a shoulder
> harness nut plate on the package shelf if you want to go with a three-point.

no shoulder harness plate on mine. the thing to do in this case is probably use
a very large piece of steel bar stock under the package shelf to insure that
the load is spread out properly.

richard
-- 
Richard Welty                                         rwelty@domain.elided
Averill Park Networking                                         518-573-7592
    Java, PHP, PostgreSQL, Unix, Linux, IP Network Engineering, Security
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided