[alfa] A/C interference with heater fan access?

[alfacybersite <acs@xxxxxxxxxxxxxxxxx>]

I'll readily admit my "expertise" with heaters is primarily with Series 
1 Spiders. Should the mounting points not have been changed for Series 3 
(?) Spiders, there are two 6 mm studs per side which will require a 10 
mm socket.

Regarding the dryer: I'm speculating if you immediately plug up the two 
ends on the dryer after removing the hose fittings, it should be 
reusable. I bought a new dryer for the daily driver six years ago but 
kept the plastic plugs on the ends and haven't quite got around to 
"firing up" the A/C. I have every intention of simply hooking up the 
lines once I've found someone who can /  knows how to install the 
illegal stuff.

Yup, I'm going to go to hell in a hand basket. It's packed, ready to go. 
On the front of the basket is an image of a green snake eating a baby.

Biba
Irwindale, CA USA 
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided