Re: [alfa] 164 projects in Bay Area?

[Damon Anderson <anderson@xxxxxxxxxxxxxxxxxxxxxxxx>]

Have you checked your local Fastenal supplier or McMaster?
I sourced almost all my bolts through them for everything. ONly
one I couldn't find there was the M7 valve cover hex head screw.

http://www.fastenal.com
http://www.mcmaster.com

Usually one of these stores in each city.

Damon

On Fri, 19 Nov 2004, Thomas Washburn wrote:

> A few days ago I posted a request for an oddball 164 
> suspension bolt.
> 
> As I mentioned in the post, I can get the bolt from
> Alfa Parts but it will take about two weeks.  In the
> meantime, my 164's right-front A-arm isn't attached
> as well as I would like.
> 
> Is there anybody out there with a 164 that is temp-
> orarily out-of-commision pending an engine rebuild/
> bodywork/etc.?  Could I borrow the bolt from your
> car?  I promise to return it in a few weeks.
> 
> The bolt is easily removed from the car without even
> jacking it up.  Takes about 5 minutes.  The car can
> still be rolled around or even driven with one bolt
> out, although I wouldn't go very fast.
> 
> I live in Los Gatos, California.
> 
> Regards
> -Tom
> thomasw@domain.elided
> --
> to be removed from alfa, see /bin/digest-subs.cgi
> or email "unsubscribe alfa" to majordomo@domain.elided
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided