Alfa Romeo/Alfa Romeo Digest Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [alfa] One more question on the Milano brake issue
----Original Message Follows----
From: "Spencer, Graham" <[email protected]>
Reply-To: "Spencer, Graham"
<[email protected]>
To: <[email protected]>, <[email protected]>
Subject: RE: [alfa] One more question on the Milano brake issue
Date: Thu, 16 Dec 2004 08:15:12 -0500
Make sure to depressurize the system. I believe the part comes with
instructions on how to, it's been a while but I believe you simply press
the brake pedal many times (25- 50) with the car off (someone correct me
if I'm wrong). I have heard that it can be very hard to remove, but in
my case I sprayed it with penetrating oil for a couple of days and it
easily came off with no fuss with just a small hex spanner and my hand.
Oh and yes, it's a straight swap, well not really a swap, it's the exact
same part. So basically you depressurize the system, unscrew the old,
screw in the new, and bleed the brake system. If all goes well, it's a
30 minute job. Oh the part is readily available online, the site that
comes to mind is gmpartsdirect.com (NFI)
Cheers
Graham Spencer
'85 GTV-6
'88 Verde
www.floridaalfaclub.com
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of
[email protected]
Sent: Thursday, December 16, 2004 7:59 AM
To: [email protected]
Subject: [alfa] One more question on the Milano brake issue
Sorry I forgot to mention on my previous post, how hard it is to install
a Reatta hydraulic accumulator into the Milano?
Is this just a straight replacement or the GM part would have to be
adapted to fit the MKII? I vaguely remember reading a few months ago,
someone had mentioned that he had to install the GM accumulator
backwards or something like that, unfortunately since my brakes where
working fine I didn't put too much attention...
I had owned my Verde for 10 months and I had learned a lot about
maintaining my Alfa from everyone on this forum, thank you.
Sincerely, Gilles
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]
_________________________________________________________________
Don't just search. Find. Check out the new MSN Search!
http://search.msn.click-url.com/go/onm00200636ave/direct/01/
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]
Home |
Archive |
Main Index |
Thread Index