IHC/IHC Digest Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: thermoquad
Hey Nick,
Have you looked at the Holley 4011 it's a spreadbore design, whereas the
4010 is a squarebore. No biggy, it would save you from installing an
adapter.
Epp
> -----Original Message-----
> From: Nicholas Rayer Jr [SMTP:[email protected]]
> Sent: Tuesday, January 27, 1998 4:13 PM
> To: [email protected]
> Subject: Re: thermoquad
>
> The thermoquad on my 80 traveler seems to running excessively lean.
> With
> the mixture screws backed out a little more than 3 turns I get a miss
> at
> idle and the plugs are bright white. Anybody else notice how far out
> the
> mixture screws are on theirs? Everything else works great on it, no
> bogging and easy starting so I hate to replace it. If I do replace it,
> any suggestions? I put an edelbrock and square bore intake on a
> previous
> scout, but don't want to go this route again. Anyone ever put a Holley
> 4010 on a 345? I want keep the use of my cruise control and don't want
> to modify the trans linkage.
>
> Nick
Home |
Archive |
Main Index |
Thread Index