Re: [alfa] clutch disc salvage

["The Baylys" <dabaylys@xxxxxxxxxxxxxx>]

Yep, it's toast !  You could try to have it resurfaced, but I'm unsure if it
is economical to do so.  I've also heard of people having problems with new
clutch plates which were slightly thicker than factory so any remanufacture
would need to be of good quality.

Beatle
----- Original Message ----- 
From: <GModelle@domain.elided>
To: <alfa@domain.elided>
Sent: Wednesday, June 09, 2004 10:30 PM
Subject: [alfa] clutch disc salvage


> Digesti,
> I've taken apart an engine which apparently suffered a blown-out rear main
> seal. The clutch looks brand new, but it's evident that the disc was
thoroughly
> oil saturated. Just curious: once this happens, is the disc trash?
Thanks,
> Digest.
>
> modelle
> 115.01
> 115.02
> --
> to be removed from alfa, see /bin/digest-subs.cgi
> or email "unsubscribe alfa" to majordomo@domain.elided
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided