[alfa] RE:

["Karl Chen" <karlcchen@xxxxxxxxxxx>]

Thank you! Got ECU out. Testing every wire now.  Do you have 164S air flow
meter I can swap with? 

 

Karl

 

-----Original Message-----
From: Karl Robrock [mailto:robrock@domain.elided] 
Sent: Thursday, June 17, 2004 4:21 PM
To: Karl Chen
Subject: 

 

Karl, 

to get to the ECU, you need to remove the tunnel cover on the passenger
side. You then will see lots of metal boxes near the firewall where the
shifter goes through. I think the one on the very top is the ECU. Under it
will be the ABS computer, the Airbag module, and on the auto tranny models
there will be an auto tranny computer. for the ECU you remove one 8mm or
10mm nut, and the ECU should just pull out horizontally towards the
passenger side. It is just tightly fit on the driver's side, not bolted in.

 

Hope this helps, 


Karl
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided