Alfa Romeo/Alfa Romeo Digest Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [alfa] Transmission front seal question
Biba....
After having done several trannys and experiencing oil seepage from the
bottom of the bellhousing, I found most of the oil was getting past the
shift rods and the shaft seal was not adding to the problem.......I now
replace the O rings and now have much less oil on the garage floor...
Frank Smith
69 1750 Spider
72 GT JR
Cockeysville, MD
----- Original Message -----
From: "alfacybersite" <[email protected]>
To: "AD" <[email protected]>
Sent: Wednesday, August 11, 2004 10:07 PM
Subject: [alfa] Transmission front seal question
> Okay, straw '69 Spider. Will be rebuilding engine, won't be rebuilding
> transmission since it seemed fine the short period I drove it - and
> client agrees to both.
>
> There was a thick build up of oil / stuff on the inside of the bell
> housing. I've replaced the transmission front seals in situ in the past,
> but not sure if I helped or made the oil leakage worse.
>
> Comments, pointers?
>
> Biba
> Irwindale, CA USA
> --
> to be removed from alfa, see /bin/digest-subs.cgi
> or email "unsubscribe alfa" to [email protected]
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]
Home |
Archive |
Main Index |
Thread Index