[alfa] 69 spider clutch hydraulics question

[alfacybersite <acs@xxxxxxxxxxxxxxxxx>]

Dean Caines offers good advice to Robert Watson for getting rid of the 
air bubbles when bleeding the hydraulic clutch. Teflon tape certainly 
helps and I also use an inexpensive one-way valve in the bleed hose.

Should that not do the trick, try adjusting the long clutch rod. 
Obviously there should be some play in it, but not too much.

I would also like to know if the clutch is not releasing (pressing in 
the clutch throw out bearing far enough) or if you are just concerned 
with perceived air in the clutch system.

Biba
Irwindale, CA USA
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided