[alfa] Re brake/clutch bleeding

[Curtiss Norheim <curtiss.R.norheim@xxxxxxxx>]

A easy to make power bleeder.

I took a lid from a large mouthed bottle (Gatorade cap may fit) it screwed
on to the reservoir perfectly. cut a piece
of foam type gasket material to fit on the inside cut/drill a hole and put a
male airline fitting through the center
with a nut on the inside.

Fill reservoir with fluid screw on this cap set you air compressor for
~10lbs connect the air hose to the fitting
open the bleeder screw. keep a close eye on the fluid level, remove air hose
before taking off the cap for refill etc.


Works great is a one man operation and is very fast

Curt Norheim
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided