Alfa Romeo/Alfa Romeo Digest Archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [alfa] the next project - removing dirt from the panel behind the fender on my spider



I can't help about the inner panel, but for POR 15, start with their web site:

http://www.por15.com/

Or their toll free number

They will tell you what distributors are nearest you.

You can also order directly from them.

Gwynne Spencer

At 08:51 PM 10/19/2004 -0700, you wrote:
>Hi all,
>
>Well, that time is coming about again.....time for another infusion of 
>elbow grease or cash for the Alfa. The cash infusion was last week, so I 
>guess this week is elbow grease.
>
>I have had various people (including the guy over at Bella Macchina in 
>Berkeley) suggest I remove the inner fender liner behind the front wheels 
>to clear out the silt that accumulates in the rocker just behind the 
>wheel. I have three concerns:
>
>1) Pulling it apart. Unlike a modern car with fancy-pants plastic fender 
>liners, this one has metal inner panels. I can't see any screws, or for 
>that matter, the outline of a removable panel. How have you all gone about 
>removing this panel?
>
>2) Putting it back. Once I take it apart, I want to put it back the way it 
>was. How have you sealed the panel? Also, does taking off the panel 
>disturb any undercoat I should replace?
>
>3) Where can I get POR-15 in the SF Bay Area? A few years back, someone 
>had recommended an auto body supply place somewhere up in Belmont or 
>thereabouts......
>
>Thanks for any help.
>
>Chris Keen
>'77 spider
>Los Altos, CA
>
>_________________________________________________________________
>Dont just search. Find. Check out the new MSN Search! 
>http://search.msn.click-url.com/go/onm00200636ave/direct/01/
>--
>to be removed from alfa, see /bin/digest-subs.cgi
>or email "unsubscribe alfa" to [email protected]
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]


Home | Archive | Main Index | Thread Index