Alfa Romeo/Alfa Romeo Digest Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[alfa] Valve Clearance Tolerance
- To: alfa-digest@xxxxxxxxxx
- Subject: [alfa] Valve Clearance Tolerance
- From: Tom Mandle <tom.mandle@xxxxxxxxx>
- Date: Sun, 31 Oct 2004 15:43:15 -0800
- Content-transfer-encoding: 7bit
- Content-type: text/plain; charset=US-ASCII
- Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:mime-version:content-type:content-transfer-encoding; b=ga2Dd6IwCex0QWeStqqcvpNAWS6wni0oNxbY/QL1NGZ7LrlA+zahPCWTHrDPJ7nZFCb4je7VfAylo2AqvHrae0SkY5UiUSuWyLgX21p9lxd/HW4lJHbCwOWU9CIM9jfsHuhsvv7tVjIJwH2cjKw0MHieV3W4a8zkm2tYv0fJVgw=
- Reply-to: Tom Mandle <tom.mandle@xxxxxxxxx>
- Sender: owner-alfa@xxxxxxxxxx
What is the tolerance for the valve clearance? At what point do the
valves need to be adjusted?
My 1969 1750 Spica FI has the following specifications and
measurements (inches).
Exhaust
Spec. 0.021"
Measured 1 = 0.0192"
Measured 2 = 0.0195"
Measured 3 = 0.0205"
Measured 4 = 0.0200"
Intakes
Spec. 0.019"
Measured 1 = 0.0168"
Measured 2 = 0.0168"
Measured 3 = 0.0167"
Measured 4 = 0.0170"
If I keep a log the thickness of the shims installed when adjusting
the values, can I pre-order the shims for the next time I adjust
before removing -the cams?
Thanks,
Tom
1969 BoatTail
Bay Area
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]
Home |
Archive |
Main Index |
Thread Index