[alfa] 1750 / 2000 Air Box Plates

[alfacybersite <acs@xxxxxxxxxxxxxxxxx>]

A fellow Alfisti mentioned he has a good source to reproduce the shiny / 
dull 1750 / 2000 air box ID plates. There is a fair amount involved. 
First the correct type of material must be sourced, a good example of 
each original also sourced, silk-screens for each design made, acid 
etching the metal to achieve the correct dullness, corners cut and 
finally holes drilled (or stamped).

Obviously the more of each "size" ordered, the (somewhat) less each 
would be.

Is it worth our effort? Email if you have a serious interest, which one 
and what it would be worth to you to have a pristine example of one or 
the other, or both.

No one is planning to get rich off this project, but the Alfisti 
involved has experience with this process and knows it is doable. 
Biba
Irwindale, CA USA  
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided